Emergency Lighting System Installation Guide

Emergency Lighting System Installation Guide

Views : 1877
Author : ASENWARE
Update time : 2023-07-20 14:29:02
Emergency lighting system is divided into centralized controlling type and non-centralized controlling type according to the control form, and centralized power supply type and non-centralized power supply type according to power supply type. At present, emergency lighting system with centralized power supply and centralized control are widely used in the market. Compared with the other three types, this type of system has many advantages.



Advantages of emergency lighting system with centralized power supply and centralized control

1.   From “nearest evacuation” to “safe evacuation”

The linkage of fire alarms can quickly and accurately get the fire location information. The computer will automatically generate an evacuation plan, and control the emergency lights to indicate the best evacuation route.

2.  Safe voltage power supply

The emergency lights are powered by 24V DC. The 24V DC power supply system is called “dead system”. Compared with 220V traditional emergency lights, the security is greatly enhanced.

3.  Low risk of accidents and low maintenance costs
The battery terminal power supply system has the risk of complete paralysis of power supply. The battery maintenance and replacement of self-powered emergency lighting system is inconvenient and the operating cost is high. Therefore, the advantage of centralized power supply in decentralized settings is very obvious.

Emergency lighting system construction

Q: How to construct the emergency lighting system with centralized power supply and centralized control?

A: Do the construction according to the drawing. Before construction, you should prepare necessary technical documents such as system diagram, equipment layout plan, wiring diagram, installation diagram and fire linkage logic description.

During the construction process, the construction company should make relevant records including acceptance of concealed works, inspection, commissioning, and design changes. After finishing, the construction company should conduct a full inspection of the installation quality of the system. The construction company should complete the completion drawing and report.

 

Q: How to install emergency lighting system?

A: 1. Installation of fire emergency sign lamps

(1) When installing on the top, try not to install it on the ceiling, and the distance between the top of the lamp and the ceiling should be greater than 200mm; when hoisting, use a metal suspender or chain, and the upper end of the suspender or chain should be fixed on the building structure.

(2) When the emergency light is installed on low-level evacuation aisle and its corner, it should be installed on the wall below 1m from the ground. The surface of the sign should be parallel to the wall, and the part protruding from the wall should not have sharp corners.

(3) When installed on the ground, all metal components of the emergency light should be corrosion-resistant. The power connection and control wire connection should be sealed with sealant, the surface of the emergency light should be parallel to the ground, the height from the ground should not be larger than 3mm, and the contact edge with the ground should not be larger than 1mm.
    (4) When installing emergency lights on evacuation aisles and main evacuation routes in large indoor public places with many people, the direction indicated by the arrow or the direction of the guiding light flow should be consistent with the evacuation direction.

Related News
Read More >>
The floods are merciless, Asenware has love - fighting floods with Bangladesh The floods are merciless, Asenware has love - fighting floods with Bangladesh
Sep .12.2024
Flood merciless, but there is love in the world. When Asenware knew Bangladesh was in the midst of a flood disaster, On September 6th, Asenware, with the support of local partners, Four different Bangladeshi charities: As-Sunnah Foundation, trustful trading LTD, Bangladesh Red Crescent Society, Chief Advisor's Relief and Welfare Fund are donated by Asenware,
What is Fire Hose? What is Fire Hose?
Oct .13.2023
A fire hose is a highly pressurized hose that is used to bring water to the fire. It may also transport flame retardants. Fire hoses can be attached to either a fire engine or a fire hydrant, and the pressure is between 800 and 2000 kPa. For reasons of fire safety, it's quite important to have a fire hose inspection as well as all fire protection equipment tested.  If, during a fire emergency, the fire hose fails it could have disastrous results.
What is Water-proof Fire Alarm System? What is Water-proof Fire Alarm System?
Sep .15.2023
Waterproof Heat Detector
Fixed Temperature Waterproof Heat Detector, the detector uses a bi-metallic strip to sense temperature change, therefore consuming minimal standby current and providing high reliability.
The Detector is particularly suited to environments, which are exposed to high levels of condensation or are hosed down. The detector has a wide operating margin allowing it to respond to both slow and fast increases in temperature; it can also sense temperature reliably in a horizontal or vertical position.
Addressable Explosion-proof Fire Alarm System Introduction Addressable Explosion-proof Fire Alarm System Introduction
Aug .08.2023
The Explosion Proof range of products has been designed to provide protection against explosions and products to ensure that all major advantages of high-quality fire detection technology can be safely exploited in industrial and hazardous environments. Many difficult sites such as metal, paint, pipelines, chemical, pharmaceutical, oil refineries, and other installations are vulnerable to the risk of explosion. In order to protect the assets and people, they need special solutions for fast and reliable fire detection.